hot surface igniter

Brand Name:KRHX

Model Number:KR-ST

Place of Origin:China

... only need approx. 1/10 of the energy of that needed by hot air fans and ignition blowers. Their ignition capacity lies between 120 and 200 watt. Depending on the positioning of the ignition element in the boiler, the ignition time of approx. 60 seconds is

Brand Name:KOKA

Model Number:KK-4121

Place of Origin:Shanghai

.../6m,all length available,slotted strut channel and solid strut channel also available. KOKA strut channel have four kinds of surface treatment: FINISHED: PG – Pre galvanized as

Brand Name:stageli

Model Number:C00016

Place of Origin:Hunan, China

...Hot Rod Igniter Kit is a vital component for maintaining the optimal performance of your pellet grill. Designed to replace the original hot rod igniter, this kit ensures efficient and consistent ignition of wood pellets, allowing for hassle-free grilling. The hot rod igniter...

Brand Name:YUYANG

Model Number:YYF050

Place of Origin:China

...Hot Wire Ignition Test Apparatus Hot wire ignition tester Application: It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time.Hot-wire coil ignition...

Brand Name:HongCe

Model Number:HWI-1

Place of Origin:China

...requirements of the "Glow Wire Ignition Test Method" in relevant standards. It is suitable for the ignition risk test of electrical and electronic products and household appliances, and simulates heat sources such as hot components or overload resistors.

Brand Name:PEGO GROUP

Model Number:HW-1

Place of Origin:China

...Hot Wire Ignition Test Apparatus /Fire Hazard Testing Equipment 1. Introduction The hot wire ignition test apparatus is designed according to the standards of IEC60950, IEC60695-2-20, UL60950, ASTMD3874 and etc.. The hot wire ignition test uses a heating wire of a specific size (Φ0.5 mm* 250 mm) and a specific material (Ni80/Cr20), after pre-annealing with specified heating power (0.26W/mm) and the specified time (8s~12s), the hot

Brand Name:KINGPO

Place of Origin:Mainland China

... of the "Glow Wire Ignition Test Method" in relevant standards. It is suitable for the ignition risk test of electrical and electronic products and household appliances, and simulates heat sources such as hot components or overload resistors. The

Brand Name:SHC

Model Number:SC-HWI

Place of Origin:China

... resistance 5.28Ω/m Anneal holder distance 250mm Specimen holder distance and height 70mm,height:60mm (the distance between the holder surface to the tray surface) Wire wrapping tension and its distance 5.4N±0.05N, 6.35mm±0.

Brand Name:Sinuo

Model Number:SN778

Place of Origin:China

IEC 60695-2-20 Hot Wire Ignition Coil Test Method Apparatus Complied Standards & Clauses IEC60695-2-20 “Fire hazard testing - Part 2: Glowing/Hot wire based test methods - Section 20: Hot-wire coil ignitability test on materials” Equipment Overview ...

Brand Name:Haida

Model Number:6004-HD

Place of Origin:China

Hot-Wire Ignition Tester Product Description This tester simulates fire hazards as specified in IEC 60695-2-20, UL 60950, IEC 60950-1999, and ASTM D3874-1997. It employs a heating wire of specific dimensions (0.5mm × 250mm) and material (Ni80/Cr20), pre-annealed at a defined power (0.26W/mm) and duration (8-12 seconds). The wire is wound in five full turns around the sample at a 6mm pitch, then tested at the same power (0.26W/mm) until ignition

Place of Origin:China

Brand Name:KeRang

... test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time. Test sample:Information technology ...

Brand Name:VOUCH

Model Number:5114

Place of Origin:CHINA

Standard GB5169 Glow Wire Test Apparatus , Hot Wire Ignition Test Flammability Temperature Test GLOW WIRE TEST APPARATUS OF MODEL 5114 Glow Wire Tester could be applicable to ignition hazard test, combustibility test of electronic industry, home electronic...

Brand Name:HCMAITI

Model Number:90919-11007

Place of Origin:China

Key attributes Industry-specific attributes OE NO. 90919-11007 Other attributes Condition New Warranty 12 months Place of Origin Guangdong, China Reference NO. TCP-002 Size * Brand Name HCMAITI Car Model For Toyota Model Number 90919-11007 Packing Neutral ...

Brand Name:Vanka

Place of Origin:China

Gas Stove Spare Parts Gas Oven Hot Surface Ignitor *, *::before, *::after {box-sizing: border-box;}* {margin: 0;}html, body {height: 100%;}body {line-height: 1.5;-webkit-font-smoothing: antialiased;}img, picture, video, canvas, svg {display: block;max-...

Brand Name:CHENG JU

Place of Origin:Guangdong，China

Carbon ERW Hot Surface Techniq Welded Seamless Tube Iron Round Welded Steel Pipes Product Detail: Type Welded Steel Pipe Materials ...

Brand Name:TONGMAO

Model Number:Stainless steel coil

Place of Origin:China

... Galvanized Galvalume Prepainted Hot Surface Technique Product Description: item value Standard ASTM Grade SGCC Place of Origin China Brand Name Tong Mao Model Number EN10215 Type Steel Plate Technique Cold Rolled Surface Treatment galvanized Application ...

Brand Name:Velander

Model Number:S355

Place of Origin:Jiangsu, Province

S355 Carbon Steel Seamless Pipe Hot Surface Painted Technique Description Carbon steel seamless pipe are a kind of carbon grade which contains a lower content of carbon. This is why fairly often these ...

Brand Name:SYL

Model Number:04,304L,316,316L,309S,310S,321

Place of Origin:CHINA

... 1.44621.4410 1.4833 1.4845 Outter Diameter (OD) 3-1220mm Thickness 0.4-120mm Length 6000mm 5800mm 12000mm or Customized Surface Finished No.1 No.3 No.4 HL 2B BA 4K 8K 1D 2D End/Edge Plain Mill Technique Cold Drawn or Hot Standard ASTM AISI DIN JIS GB EN

Place of Origin:Chongqing

Model Number:DZQ6B

DZQ6B Engineering Seismograph (Surface Wave Instrument) ADD: NO.1 Kuaileli, Xiaolongkan Street, Shapingba District, Chongqing China; Skype: lucyfang9 ; Website: www.lucydrillingrig.com, email: lucyfang15@yahoo.com; M: +86-13628481197 TEL.:+86-15923510719,...