flying probe test

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I17

IEC61032 Figure 17 Test Bar 43 Product information: This test bar 43 confirms to the IEC61032 figure 17 and IEC60335 standard requirements. It is used for testing the protection of thermal radiation heaters which are fixed or portable visibly. Standard:...

Brand Name:Aries

Model Number:0.4mm probe

Place of Origin:US

...Probe Test Socket for Devices up to 27mm Square FEATURES Aries unique universal socketing system allows the socket to be easily configured for any package, on any pitch (or multiple pitch) from 0.2mm or greater, in any configuration, with little or no tooling charge or extra lead-time. For Test...

Brand Name:ALLIED TESTING

Model Number:TPU1

...UL jointed test finger probe This is the “UL” test finger, researched and designed by UL and required by most UL Standards. Palm simulator and restricted joint movement simulates human finger ...

Model Number:TP41

... Model TP41:Test Thorn Probe IEC 61032 IEC60065 For testing accessibility in appliances with visibly glowing heating elements. Also for testing parts supporting such elements. Complies with IEC, EN, UL & CSA requirements. Made entirely of stainless steel.

Brand Name:Sinuo

Model Number:SN2210-19A

Place of Origin:China

...Probe Test Device for EV Connector Electrical Safety Testing Professional electrical safety testing equipment designed to verify protection against electric shock in electrical appliances, EV connectors, and charging equipment. The system works with standardized test probes to determine whether hazardous live parts can be contacted during accessibility tests...

Place of Origin:China

Model Number:TPFN

Finger Nail Probe Model TPFN: Finger Nail Probe For testing the requirement of snap-in devices and snap together enclosures that protect the user from accessibility to hazardous parts. Complies with most Standards including IEC 60335 based ...

Model Number:TPU6

UL Hazardous Moving Parts Probe Model TPU6: Hazardous Moving Parts Probe For testing accessibility to hazardous moving parts such as access tofan blades through a fan finger guard. Complies with UL Standards. Made entirely of stainless steel, weighs 1 lb.

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I19

Test Plug For Mechanical Tests On Antenna Coaxial Sockets Product information: This test plug conforms to IEC60065 Figure 8 standard requirement. It is used to test the antenna coaxial socket which is installed on the device and equipped with parts or ...

Brand Name:PEGO

Model Number:HP-NK

Place of Origin:China

Portable Analog Force Gauge Pull - Push Gauge for Test Finger Probe 1.Feature ● High resolution: 1/200 scaleplate ● Hand-held equipment with small volume ● High accuracy: 0.5% ●Two units to read the test result: N, Kgf 2.Parameters Model Max. Range...

Brand Name:JLX

Model Number:LX-12CD

Place of Origin:Made in China

...Test Rod Probe of IEC 61032 Figure 3 - Test probe C This rod is intended to verify the protection of persons against access to hazardous parts. It is also used to verify protection against access with a tool. 2) 1,0mm Test Wire Probe of IEC 61032 Figure 4 - Test probe...

Brand Name:KINGPO

Place of Origin:Mainland China

...Test Equipment Anti Shock Probe Experiment Device Product details: This device is designed and manufactured according to the standard of IEC60335. It is used with the testing probe for the convenience and correctness. In the two output electrodes, the low potential (the red one) is connected with the energized part of the electrical appliance and the high potential is connected with the input terminal of the probe

Brand Name:PEGO

Model Number:PG-TP2

Place of Origin:China

IEC61032 Test Finger Probe 2 Diameter 12.5mm Steel Sphere with CNAS Certificate Handle Available 1. Introduction of 12.5mm Steel Sphere: The 12.5mm steel sphere is designed according to IEC61032 figure 6, meet the requirement of IEC60529-IP2. The diameter...

Brand Name:QH Industrial

Model Number:Pogo Pin

Place of Origin:Shenzhen ,Mainland of China

Spring Loaded Pin, Pogo Pin, Probe Test Pin, Fully Through Hole Brass Pogo Pin,Brass Probe Pogo Pin from Mainland China Company Information Production Workshops & Testing Equipments & Certification Quality Assurance 1> IQC: Incoming material control to ...

Brand Name:JLX

Model Number:LX-DT1

Place of Origin:Made in China

... Probe D) is the necessary tool to proceed protecting electric shock test of household and similar electrical appliances. Technical parameters: 1. Wire length: 100 mm 2. Wire diameter: 1.0 mm 3. Circular-baffle ...

Brand Name:JLX

Model Number:LX-1231

Place of Origin:Made in China

...Test Probe 31 of Access Probes to Hazardous Mechanical Parts This probe is intended to verify the protection against access to hazardous mechanical parts of the grinding system of food waste disposal units. Probes specifically intended to verify the protection of persons against access to hazardous mechanical parts. Specification: Test Probe 31(Grinding Probe) 1. According to : IEC61032-1997 fig 14 2. The Test

Brand Name:JLX

Model Number:LX-1211

Place of Origin:Made in China

.... It is also used by the standards of CSA, IRAM, UL. IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts. The Rigid Test Finger was made on stainless steel and

Place of Origin:China

Brand Name:Julixing

Model Number:LX-4706K

...GB4706.1-2005. Accessibility probes are used to test the size of openings to ensure that fingers and objects do not have access to hazardous parts in equipment and machinery. SPECIFICATIONS 1. Jointed Finger Probe: Precision probe which follows IEC ...

Brand Name:OEM PCB PCBA Services

Model Number:N/A

Place of Origin:China

Prototype Board Test Equipment PCB Electronic Components Customized Application Our Advantages CESGAT has strong PCB electronic components procurement and comprehensive supporting capabilities. With the CESGATE professional team, we provide thousands of ...

Brand Name:kingpo

Place of Origin:china

Test Rubber Ball Usage rubber ball used for dynamic stability testing to UL (USA) standards. A ball, 2 and 3/4/16 inch diameter (2.187 inches), filled with No. 60 core sand. It is suspended on a cord and allowed to swing as a pendulum to strike a surface...

Brand Name:JIETENG

Model Number:PCB circuit board

Place of Origin:China

Product Description: PCB Board Assembly is a circuit board assembly process that involves the printing of conductive pathways onto a substrate, such as a printed circuit board (PCB), and the assembly of components into a single board. The board is then ...