Full Automatic 4 Colors Printer Slotter Die Cutter Folder Gluer 3-7 Mm Thickness

Full Automatic 4 Colors Printer Slotter Die cutter Folder Gluer

Technological Parameter :

Printing Department :

Printing Roller

v Using high-quality steel to make the printing roller, grinding in surface, and surface hard chromium plating processing, the axial direction with the center benchmark scribed line, circumferential direction with hanging plate benchmark scribed line.

v Dynamic balance adjustment, stable running, adapt to the high-speed operation.

v Ratchet wheel fixed type plate roller, with hanging version slots, to adapt to rapid change.

v Planetary wheel phase adjustment with high precision, dynamic& static can do 360 degrees of positive and negative adjustment, encoder control device.

v Foot switch, convenient to hanging plate.

v Computer adjustment structure to adjust printing roller in axial direction, the biggest adjustment range is 5 mm.

v Press the zero button, printing roll back to zero position, convenient operation to change the order, shorten the time of changing order, reduce paper waste.

• Embossing Roller

v Made of high quality seamless steel tube to refined processing, dynamic balance correction, smooth operation, surface grinding, hard chromium plating.

v Pressing-printing clearance adopts lifter fine-tuning device, fast handle adjustment, dial display, easy to adjust.

• Anilox Roller

v Diameter of anilox roller is Φ175 .

v Pneumatic anilox roll automatic lifting device and stop rotation device, anilox roll down and in contact with the plate when feeding paperboard, anilox roll automatically rise seperate with the plate when stop feeding, in order to protect the plate; automatic idlin when not printing, to prevent the ink dries up.

• Rubber roller

v The rubber roller diameter is Φ177.

v Made of high quality seamless steel tube of refined processing, dynamic balance correction.

v Steel tube surface with high quality wear-resisting rubber, long service life.

v Overrunning clutch type automatic idle device to prevent ink drying up.

v Surface with middle or high grinding, suitable to high precision network and large area printing.

v Fine-tuning device, ensure uniform inking.

• Ink System

v Pneumatic diaphragm pump, simple operation, convenient maintenance, ink stability.

v Automatic recycling cleaning, automatic ink.

v Mesh filter impurities, ensure the quality of printing.

v Ink fountain is made of stainless steel, not easy corrosion.

v Short of ink alerts.

• Phase Adjustment Structure

v Planetary gear structure.

v Electric adjust plate 360 degrees.(whether running or stopping status, can adjust either)

v Equipped with 7.0-inch colorful touching screen, printing roller phase and horizontal adjustment, the encoder signal transmission, all electric control.

• Phase Fixed System

v Electromagnetic braking brakes device.

v Each unit seperation or combination , the original mesh point of transmission gear remains the same.

Folding Gluing & Bundling Department :

Special Focus

1. Feeding department : If paper stuck when feeding, computer will make the plate up automatically and stop the ink transfer function. And the traditional feeding way, if feeding excessive warpage cardboard, paper stuck, the host is still in normal running and cause the printing plate repeat ink, must stop to brush version, and then start up work. This reciprocating greatly reduces the working efficiency, so waste paper rate rise, this functions can solve the problem.

2. Feeding air bellows air volume control : our company adopts the function of segment for providing the wind and stop the wind. The traditional air bellows has also set wind stop valve in the past, but wind-off effect is not ideal, to make leakage of the wind when don’t need the wind, the air suction is not enough when using the wind, make poor feeding, this bellows is the solution to the problem.

3. The tail of machine , the worker control the speed device, testing control lift paper & stop feeding device. The device means that when the worker adjust finish the paperboard, walked to the back output the paperboard part , to check if the carton printing and slotting position is suitable, if there are any problems, the worker can direct control the front feeding table to lift the paperboard and stop feeding in this place. If no problem, the worker can directly increase the speed to the normal speed, don’t need to run back and forth, and avoid the occurrence of carton scrap in time.

Cangzhou Zhaoli Import & Export Trade Co.,Ltd. is a new type company which consisted of import & export sales department and two machine manufacture factories . Specializing in the production of two series of products, the one type of main products are " carton forming slotting machine, carton printing slotting machine, automatic multi knives slitting machine, automatic partition board assembler machine, automatic partition board machine" etc. for small carton packing ; the other type of main products are like the tranditional carton machines , like flexo printer slotter die cutter machine , folder gluer mahine , laminator machine , corrugated cardboard production line etc. At present, our products not only sale in the domestic but also sale to Europe Union, Middle East, South-east Asia, Russia, South Africa and other countries and areas.

Cangzhou Zhaoli Carton Machinery Co,Ltd. was established from research and development for the corrugated carton printing machine to current " carton specializing machines serious and automatic partition board assembler machine serious " , it gives full play to every technologies on the advancement and manufacturing on the reliability, thus we can keep the leading position in the field of corrugated carton making machinery. All of our machines adopt advanced laser cutting technique in processing center to finish every structure units, our machines can use our unique technology to realize even if the cartons are difficult to make.

Our company will do our best to meet customer's requirements, and bring abundant retribution to new and old customers with new innovation, development and perfect after-sale service.