5L Volume Automatic Pet Blowing Machine With Touch Screen

Plastic Injection Stretch 20 Liter Bottle Blow Molding Machine

1.Product Description

This 20L blow molding machine is suitable to produce HDPE, LDPE, PP bottles which is under

20 liters. This machine could install parison controller to enhance the bottle quality. It is controlled

by PLC system, all the temperature controller are controlled by touch screen interface. Move

moulds and blow process is faster after enhanced the technology to straight type guide rail, so

the production capacity of this machine has been increased apparently.

construction

Station A:Preform injection

The bottle neck will be molded accurately after injecting the material into the cavity,After proper

control,the mold open and mandrils to...along with the cavity.

Station B:Blow molding

Blowing action was done at this part,molding would be complete after cooling.(bottle shape

decides by the mold cavity).The air came out from the mandrils huffs the cavity,make the cavity

cling to the mold.Then mold open and the mandrils turn to...along with bottles.

Station C:Stripper

The bottle automatically will be ejected from the mandrils at this position and then to be

packed.The three actions of injection/blowing/ejection working at the same time,which makes the

machine of high efficiency and low waste with bottles.

technical parameter

product pictures