ODM 1310nm 10km 10G SFP+ Optical Transceiver Duplex LC Connector

ODM 1310nm 10km 10G SFP+ Optical Transceiver Duplex LC Connector

Huawei Compatible 10GBase-LR SFP+ Transceiver (SMF, 1310nm, 10km, DOM, LC)

Product Features
● Supports up to 11.3Gb/s bit rates

● 100% HP Compatible

● SFP+ Transceiver Module

● Singlemode Fiber (SMF)

● Up to 10km Reach

● 1310nm Wavelength

● Duplex LC Connector

● Digital Diagnostics (DDM)

Electrical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Note:

1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.

2. Into 100Ω differential termination.

3. 20 – 80%. Measured with Module Compliance Test Board and OMA test pattern. Use of four 1’s and four 0’s sequence in the PRBS 9 is an acceptable alternative.

4. LOS is an open collector output. Should be pulled up with 4.7kΩ – 10kΩ on the host board. Normal operation is logic 0; loss of signal is logic 1.

Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Notes:

1. Average power figures are informative only, per IEEE 802.3ae.

2. Measured at the BER less than 1E-12, back to back. The measure pattern is PRBS 2^31-1 with worst ER=4.5@ 10.3125Gb/s.

Product Descriptions

Olinkcom’s OLSP311XL-CD10 delivers 10 Gigabit connectivity over singlemode fiber cable with a range of up to 10km.

It provides a dependable and cost-effective way to add, replace or upgrade the ports on your networking equipment.


Applications
● 10G Base-LR
● 10G Fiber Channel
● 10G Ethernet

Compatibility

Olinkcom's Huawei Compatible 10GBASE-LR SFP+ transceiver can be worked with the below Huawei network equipment.

Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able to offer a vast range of optical modules from 155Mbps ~ 100Gbps, including CFP2, QSFP+, XFP, SFP+, SFP, PON and CWDM, DWDM solutions, to support various protocols and meet with different requirements on Fiber Channel, Ethernet, SONET/SDH, FTTx, Data Center etc. And all product quality is backed by our strong R&D ability, rigorous quality control procedure and rich production experience. Our modules are exported to China domestic market, Asia, Southeast Asia, Europe and the American market, etc.

With the concept of “Quality First, Service Oriented, Realistic and Innovative, Continuous Improvement”, Olink keeps developing and optimizing product design solutions, to provide our valued customers with the most cost efficient product and service, as well as some customized products.