Precise Computer Room Air Cooling Units For Small / Medium Base Stations

Product Introduction

With the popularization of information technology, many communication base stations will introduce the use of precision air conditioners in order to dissipate heat. In order to reduce the operating cost of customers and stabilize the use environment of the equipment, our company has developed a new type of Cool-smart precision air conditioner, which has the characteristics of large air volume, small enthalpy difference and high reliability.

Advantages

Structure & Components

Control panel
*Using a 4.3-inch touch screen controller, with Chinese/English intelligent selection, strong operability, parameter setting through touch screen

*Showing the temperature, relative humidity, system operation, setpoints and alarms on display

*Multiple selector buttons can adjust cooling/heating or humidification and the alarm control settings easily

*All control setpoints and alarm setpoints can be stored in internal memory

Air supply system
*Up air supply system, indoor hot air is sucked in through the return air outlet of the Cool-smart units, and then sent to the air by the fan after passing through the coil cap or duct. G4 filter is installed in the return air outlet of the unit.
*Downward air supply system, indoor hot air is sucked in through the G4 filter on the upper end of the unit, and then passed to the bottom platethrough the coil by the fan of the unit.

Indoor evaporator
*Evaporator coils are constructed of copper tubes and aluminum fins and are designed for the high sensible heat requirements of electronic equipment.

*The indoor air circulation is completed by a centrifugal fan with a high-efficiency, low-noise, backward-inclined outer rotor, which has been adjusted for dynamic balance before leaving the factory.

*The fan is built with self-adjusting bearings and permanent grease, so there is no need for separate bearing maintenance during its lifetime.

Certificate