1000L Tank Ultrasonic Cleaning Machine 40KHz For Heavy Engine Block Hardware

1000L Painting and Vacuum Coating Pretreatment 7200W Ultrasonic Cleaner 28/40KHz
Temperature choose:
The most suitable cleaning temperature for the water cleaning solution is 50-60 ° C. Especially in the case of cold weather, if the temperature of the cleaning solution is low, the cavitation effect is poor, and the cleaning effect is also poor. Therefore, some washing machines are wound around the heating cylinder to heat the heating wire for temperature control. When the temperature rises, cavitation is easy to occur, so the cleaning effect is good. When the temperature continues to rise, the gas pressure in the bubble increases, causing the impact sound pressure to drop, reflecting the multiplication of the two factors.
Specification

Images:
Clean effect:


Same series with different size:

How to Use an Ultrasonic Cleaner for Medical & Surgical Instruments?
Medical and surgical instruments in a variety of sizes and complexity can pose challenges when it comes to cleaning, disinfecting and sterilizing them after use. An ultrasonic cleaner is an ideal tool for the first step in this three step process to protect medical personnel and patients from possible infection due to pathogens that remain on the instruments after a procedure.

Why we use filter(filtration cycle system)
Cleaning of the manufacturing industry Cleaning of the manufacturing industry usually requires a large amount of solvent to remove grease and dust on the surface of the part. Usually, a large amount of solvent and detergent are used to remove the grease and dust on the surface of the part. However, the use of solvents and detergents inevitably increases the amount of water, which increases the cost of cleaning and is not environmentally friendly.
The circulation filtration system effectively reduces the cleaning cost, greatly reduces the discharge of wastewater, and achieves the purpose of sustainable recycling of cleaning water.

Skymen Technology Corporation Limited, which is a leading manufacturer and national high-tech enterprise, was founded in 2007. There are 2 factories of Skymen, one is located in Shenzhen, closed to HongKong. And the other is located in Shaoguan, Guangdong province, China.

We have been focusing on R&D of ultrasonic equipment & cleaning solution for more than 17 years with over 300 employees and plant size 39,000 square meters. Products include CE, FCC, PSE, KC and other safety certification, as well as ROHS,PAHS, REACH, SCCP environmental certification, and passed the factory audit BSCI, ISO9001 quality management system.

There are more than 200 patents & certificates in total. Our products range covers industrial ultrasonic cleaner, homeuse ultrasonic cleaner, commercial ultrasonic cleaner, full-automatic ultrasonic cleaning machine, ultrasonic transducer rod series, ultrasonic transducer plate series, tunnel cleaning machine, large hydrocarbon ultrasonic cleaning equipment with PLC, large ultrasonic cleaning equipment with vacuum implementation, etc.

2023 Skymen self-built Shaoguan industrial Park

2020 New Factory Industrial Park

Shenzhen R&D Basement

Shenzhen Marketing Center