Auto Detecting Signal Type Wireless Signal Detector Wireless Signal Detector

Auto Detecting Signal Type Wireless Signal Detector/Wireless Signal Detector
7LW, this is also a multi-purpose radio wave detector, and 8LW is a category, it is multi-purpose. The difference is that the alarm method is a way of broadcasting. This one also focuses on the bug, and in the case of the bug, the alarm mode has a voice broadcast function. The full function does not mean that every function will be weakened. The function is more of a difference between 7LW and 8LW. This is a bit. 7LW does not have the 8LW environment adaptive detection function, it can detect that 2MW of the bug can reach 25M, 8LW can only reach 20M. Other camera-like cameras have a weaker range of detection. 8LW has a strong electric wave display alarm, this has no strong electric wave alarm function. With sensitivity adjustment function, not digital, it is a knob type. 7LW can display the detected signal type, display the detector settings through different lights, mainly alarm mode, alarm mode BB, vibration, voice broadcast, Different radio wave patterns can then be displayed. Wi-Fi? LTE?

Featured Function:
1. Power-on Self-test
1) All the LEDs of this device will be lit up every time this device is switched on.
2) Then the 8-LED Signal strength indications will be put out one-by-one.
3) Other LEDs will also put out, only remaining Power and Beep LED.
4) This is the self-test of all functions.

2. Unique Acoustic Display
Some companies supply bug detector, but none of them has acoustic display. Furthermore, they are just signal detectors for lower frequency band less than 500 MHz.

This device has three kinds of warning modes: Beep, Vibration and Acoustic. After detected signal, set the warning mode to Acoustic to hear and identify if it is audio signal.

3. No Interference With Radio Station
The audio receivers have good ability in audio signal, so you will hear a lot of radio station programs during your scan. Those audio receivers seem high priced radio. It makes your scan annoying and complicated, you will miss the real bug signal easily.

This device will not mistake the radio station signal for bug signal. The radio station programs will not distract you from your scan job.
4. 8-LED Signal Strength Indication
The 8-LED bar will light up according to the signal strength from green à yellow à red, stronger signal, more LED.
5. Clear Indication of Setting,Signal Signal Type&Battery Status

6.Warning Modes
Press the 2 buttons in left side of front view of this device to change the warning mode. Default setting is beep.

1. Vibration
2. Beep (Default)
3. Acoustic: Identification for audio signal

7. Auto Indication of Signal Type
This device will indicate detected signal automatically.

1. CAM / BUG / LTE : Analog and Spread spectrum signals of wireless camera, wireless bug, signal jammer and 2G / 3G / 4G cell phones, etc..
2. WiFi: Digital signals of WiFi, IP camera, wireless digital camera, etc.

WiFi exist in many places, user will always panic when detector is alerting. This device can identify and point out WiFi signal to reduce user's panic.

10. Battery & Charging Status

1) Battery Low : Warning of battery power running down.

2) Charging: Indicate the status of battery charging. When starts charging, indication lights up in red as quick charging, when charging to about 70%, it will change to slow charging, the indication shift to green.
11. Still Find Out Bug In Silent Place
All others’ audio receiver can not help you to find where the bug is, also can not display any voice if none is talking.
This device can find bug in silent place. It has a sensitivity tuner. When detected signal, user can lower the sensitivity a little and a little, and then approach gradually to find the signal source.

Look through the Viewfinder on Lens finder, it is more easily to identify the camera lens. This lens finder also can uncover a hidden wireless camera even the camera is turned off.
14. Sensitivity(Distance)&Volume Tuner
This device has two tuners for user to adjust sensitivity (SENS.) and volume (VOL.).

1) SENS.: Adjust the detecting distance and eliminate environment noise. But in Acoustic mode, this tuner is tuning for signal in better receiving.

2) VOL. : Volume adjustment of beep and audio signal.

15. Expert 3G2100 Detection
3G 2100 is most popular cell network, including voice and data communication. In many countries, cellphone will shift to 3G 2100 automatically when signal of 4G network is poor.
This device has an individual 3G 2100 detector module which has excellent detecting ability, none can compare with.

Specification * specification may change without prior notice.

* The detecting distance of wireless (RF radio frequency) device will be varied depending on its output signal strength.

Welcome to NecomTelecom. Are you looking for customized information security solution? If so, I want to say thanks for your choice and you are right. Unlike other factories in this security industry, we can provide for you with customized solutions.

We are the first company in this industry to have its own brand “Vodasafe”, Since 2006 , Our Company started to provide products and services in the fields of prisons, military and police. We offer kinds of products and services worldwide. All of our products have attained CE and

FCC certifications and CMA Certification issued by the Public Security Ministry of China.

For Products, we have signal jammers, signal detectors and signal amplifiers.

Radio frequency jammers and detectors are mainly aimed at the destruction of terrorists.

They infringe on personal privacy and security through wireless devices,such as remote-controlled bombs, roadside bombs, and various weapons controlled by drones, wireless spy camera, spy bug, tracking device, eavesdropping devices, and so on. Signal amplifiers are mainly used for stop dropped calls and improve call quality in your home or working places or vehicles.

For Services, we have professional customer service staffs to help you make clear the requirements and recommend suitable solutions for you. Welcome to our factory to test and inspect products, except for your coming, we could supply video inspection, video conference and on-site service, We can send technical personnel to install and repair on site.

The future has come, We will invest more manpower and material resources in the field of information security products’ smart operation research to provide better service solutions for anti-terrorism and anti-riot activities.

Our company's principle is quality first, customer first. Your choice is our driving force. Please contact with us about your requirement for project or advices.