H.264 1080P SDI recorder SDI&HDMI HD ENCODER

H.264 1080P SDI recorder SDI&HDMI HD ENCODER

WhatsApp:+86 13530635461

Connections:

1, Connect power with DC adaptor, by DC12V or DC5V, you also can connect PC/DC5V to PC with USB cable, but please don’t power together. And power LED and SDI video source LED will light.
2, Plug an USB disk or SD card, just don’t connect together.
3, Connect SDI camera or HDMI camera or other HDMI video source to HDMI input port.
4, With HDMI cable or SDI cable connect HDMI OUTPUT or SDI OUTPUT to monitor. Please use HDMI OUTPUT to monitor if you input HDMI video source.
5, The “LINE OUT” is for connect to speaker or earphone, it’s not necessary if you don’t need, cause the HDMI output also with audio output.

Record:

After connection is ready, you should see the pass through video on the screen. You will see the blue power indicator on.

The source LED (orange) will be on default at SDI side, means only SDI input will be pass through and recording. You can press “SOURCE” button or remote controller to change the input source to HDMI if you want to input one HDMI video source.

To record video is very simple --- press the record button (or remote controller), then you will see the REC indicator turns on, it means now recording.

Use SNAPSHOT button of remote controller, you can get a still image by one press, but it is only work when NOT recording.

There are several reasons for no actions when press record button, you may need check:
1, The input video source disconnected.
2, The USB flash (or SD card) is out of memory.
3, The format for USB flash (or SD card) is not suitable, e.g. exFAT. JS3030 supports FAT, FAT32, and NTFS for USB flash, and only FAT32 for SD card.
4, The USB flash (or SD card) is not connected well.
5, The USB flash (or SD card) is not ready, normally, it will take 4~8 seconds after plug it on.
To stop recording, just press REC button again, will see REC indicator flash few seconds then turns off, means the record is stop, now you can take off your USB flash (or SD card).

Note: please do not take the memory off when the indicator is flashing. The recording will automatically stop if the USB flash (or SD card) out of space.

After stop recording, connect the USB flash to computer will see the recorded files: for 1080P recording, file will be Encode_1080P_1, for 720 or 480p recording, file will be Encode_1.

Every record/stop operation will create a different recording file: Encode_1080P_1, Encode_1080P_2, Encode_1080P_3… and so on.

The max size per file will be around 1.95GB (around 15 minutes for 1080p video), when you record a video more than 1.95GB(15 minutes), JS3030 will partition it in more than 1 file, for example: if you record a 45 minutes 1080p video by one click recording, you will see 3 files: Encode_1080P_1, Encode_1080P_1_1, Encode_1080P_1_2…and so on

Sometimes you may find that some recorded video with problems, like: skip. It may caused by you are using a USB flash on NTFS format, and you haven’t click “safety remove” the device when disconnect from computer (especially for USB HDD, if not safety remove, may caused serious problem). You can try to format it to FAT32 if that problem keeps happen.

One-Stop electronic products wholesaler ---C-factor, your reliable purchaser in China, International Electronic products OEM/ODM Supplier! C-factor Co., LTD. located in pudong new strict,Shanghai. With a beautiful environment and convenient transportation. C-factor has always been focusing on the development of “Creative Electronic products” Since founded in 2015.With continuous efforts and innovation,it has developed into an excellent Electronic ecigarette and bluetooth microphone supplier with a set of Development, Production, Marketing and Service. Provides Fashional, Healthy and High Quality e-cigs and bluetooth products to customers all over the world.