gas hobs 4 burner

Brand Name:KingPo

Place of Origin:China

... or amply ventilated area us EN 14543:2005+A1:2007 (E) Clause 7.2.2.2 Figure 1 Test Cone Protecting against accidental contact with the burner 7.2.2.2 Test cone The appliance is put

Brand Name:KingPo

Model Number:FTech-ASTM162

Place of Origin:China

... the propagation properties of material in USA. The heat resource use gas radiant panel heating and a gas burner ignited. This method is widely used in flame propagation properties of the test material for rail train material to evaluate flame retardant ...

Brand Name:KingPo

Place of Origin:China

Model Number:KP-FT03

....5-2008,GB4706.1-2005 ,etc. Needle Flame Tester uses Needle-shaped burner in required size (Φ0.9mm ) ;transport butane gas into it ,ignite the specimen at a regular time and angle of 45° ,to check whether the specimen ignite ,lasting ignition time and

Brand Name:KingPo

Model Number:KP-FT02

Place of Origin:China

... of IEC60695 -11-5,GB/T5169.5-2008,GB4706.1-2005 ,etc. Needle Flame Tester uses Needle-shaped burner in required size (Φ0.9mm ) ;transport butane gas into it ,ignite the specimen at a regular time and angle of 45° ,to check whether the specimen

Brand Name:KingPo

Model Number:KP-FT02

Place of Origin:China

... of IEC60695 -11-5,GB/T5169.5-2008,GB4706.1-2005 ,etc. Needle Flame Tester uses Needle-shaped burner in required size (Φ0.9mm ) ;transport butane gas into it ,ignite the specimen at a regular time and angle of 45° ,to check whether the specimen

Place of Origin:China

Brand Name:HongCe

Model Number:NF-1

IEC60695-11-5 Needle Flame Test Apparatus Product information: The Needle Flame Tester consists of a Ф0.9mm needle-shaped burner that tilts with the angel of 45°and provide it with butane gas. The fire hazard of the equipment when there is flammule inside...

Place of Origin:China

Brand Name:HongCe

Model Number:NF-1

... it with butane gas. The fire hazard of the equipment when there is flammule inside the equipment that caused due to the fault condition is assessed by whether the specimen can be ignited or the combustion time and length. This ...

Brand Name:huitong

Place of Origin:Yiyang,China

...μm. The fiber can be used for sintering or knitting to make a special transparent material with a three-dimensional network structure for metal fiber burner. Some special varieties can be used in the environment of about 1000 °C for a long time, and can

Brand Name:Huitong

Place of Origin:Yiyang,China

Model Number:K2000/180-ULT

... conditions and accurately meet different needs. Some Regular Solutions: 1. Adjustment of surface covering By adjusting the important parameters of the burner surface covering or using a combination of multiple coverings, the burner performance can be

Brand Name:huitong

Model Number:HT-HDH-20

Place of Origin:Yiyang,China

... vacuum sintered. * withstand temperature 900° * High Porosity 【Application】 1,GPF/DPF 2,Burner Media Open structure, low thermal inertia: enhanced flame premixing Thermal applications for domestic gas and industrial gas burners, interior heaters, etc

Brand Name:huitong

Model Number:HT-MP25

Place of Origin:Yiyang,China

... temperature 900° * High Porosity 【Application】 1, GPF/DPF 2, Burner Media Open structure, low thermal inertia: enhanced flame premixing Thermal applications for domestic gas and industrial gas burners, interior heaters, etc. 【Parameters】 Fiber

Brand Name:huitong

Model Number:MP20

Place of Origin:Yiyang,China

... 【Application】 1,GPF/DPF 2,Burner Media Open structure, low thermal inertia: enhanced flame premixing Thermal applications for domestic gas and industrial gas burners, interior heaters, etc. 【Parameters】 Fiber Diameter(m) Weight/square meter(g/m2)

Brand Name:huitong

Model Number:MP20

Place of Origin:Yiyang,China

... vacuum sintered. * withstand temperature 900° * High Porosity 【Application】 1,GPF/DPF 2,Burner Media Open structure, low thermal inertia: enhanced flame premixing Thermal applications for domestic gas and industrial gas burners, interior heaters, etc

Brand Name:huitong

Model Number:MP25

Place of Origin:Yiyang,China

... by air-laid and then vacuum sintered. * withstand temperature 900° * High Porosity 【Application】 1,GPF/DPF 2,Burner Media Open structure, low thermal inertia: enhanced flame premixing Thermal applications for domestic gas and industrial gas burners,

Brand Name:huitong

Model Number:MP20

Place of Origin:Yiyang,China

...vacuum sintered. * withstand temperature 900° * High Porosity 【Application】 1,GPF/DPF 2,Burner Media Open structure, low thermal inertia: enhanced flame premixing Thermal applications for domestic gas and industrial gas burners, interior heaters, etc.

Brand Name:Huitong

Model Number:MP Series\HP Series\LP series

Place of Origin:Yiyang,China

... temperature 900° * High Porosity 【Application】 1,GPF/DPF 2,Burner Media Open structure, low thermal inertia: enhanced flame premixing Thermal applications for domestic gas and industrial gas burners, interior heaters, etc. 【Parameters】 Fiber

Brand Name:huitong

Model Number:35um

Place of Origin:Yiyang,China

...sintered felt of GPF or DPF FeCrAl (Fecralloy) Fiber Mat/Fiber Fabric is used on metal fiber burners, such as radiant burners and gas infrared burners. It is suitable for use over a wide range up to 1100°C. FeCrAl (Fecralloy) fiber mat has longer high ...

Brand Name:huitong

Model Number:Fecral

Place of Origin:Yiyang,China

... and gas infrared burners. It is suitable for use over a wide range up to 1100°C. FeCrAl (Fecralloy) fiber mat has longer high temperature life, having greater oxidation ...

Brand Name:huitong

Model Number:35um

Place of Origin:Yiyang,China

... for GPF or DPF The common FeCrAl Mesh is made of alloys such as 0Cr25Al5, 0Cr23Al5. It is widely used on gas burner, tail gas treatment device and other high temperature applications. 【Description】 The Fecral fiber is made of iron-chromium-aluminum...

Brand Name:huitong

Model Number:MP20

Place of Origin:Yiyang,China

Sintered Metal Fiber Felt In Automobile GPF/DPF Fecral fiber Sintered Felt Product description The common FeCrAl Mesh is made of alloys such as 0Cr25Al5, 0Cr23Al5. It is widely used on gas burner, tail gas treatment device and other high temperature ...