Electric Heating Furnace Frequency Conversion Floor Type
Semiconductor Heating Heating Hot Water Boiler
Overview of electric heating furnace:
The electric heating furnace is a new generation product that uses
electricity as energy to heat heating, air conditioning or sanitary
hot water through electric heating tubes. The machine is
characterized by fast heating, high thermal efficiency, small size,
no noise, modular heating, energy saving, easy installation and
use, and integrates advanced technologies at home and abroad.
Heating methods (electric heating rod, quartz tube transition film,
PTC liquid transition film, ceramic semiconductor, electromagnetic
type and other heating methods).
Electric Heater Boiler Technical Parameter:
|Serial number||Product model||Company||LC-L-20kw||LC-L-30kw|
|5||Minimum flow of water pump configuration||L/min||32||36|
|6||Hot water yield 50 ℃||L/min||5.62||13.8|
|7||Design thermal efficiency||℃||98%||98%|
|8||Maximum water temperature||℃||85||85|
|9||Low temperature protection temperature||℃||5||5|
|10||Overall dimension (length * width * height)||mm||490*490*900||490*490*900|
|11||Water inlet and outlet interface||DN||32||40|
Characteristics of electric heating furnace:
1. Fully automatic intelligent control technology, no need for
special personnel to watch. The working mode is flexible and can be
set to manual or automatic mode.
2. The automatic operation time period of the boiler can be set as
required. A number of different working hours can be set in a day
to enable the boiler to automatically start each heating group in
time, and the heating group can be switched on and off in a cycle,
so that the service time and frequency of each contactor are the
same, and the service life of the equipment can be extended.
3. The controller can automatically control, calculate and track
the water temperature or pressure, automatically start and stop the
feed pump and electric heating pipe when the load changes, or
4. It has a complete range of protection functions, including
leakage protection, water shortage protection, grounding
protection, steam overpressure protection, over-current protection,
power supply protection, etc., and the boiler is automatically
protected, so that it is safe to go home.
5. Small boiler body, electromechanical integration, easy to
install and match; Large boiler furnace body and electric control
are designed separately to eliminate the influence of high
temperature on the electric control part of the furnace body and
ensure the stable operation of electric control devices.