Profesional universal brake caliper accuracy carbon steel dial
Carbon Steel Order No.
Stainless Steel Order No.
1) Measuring range: 0-100mm to 4000mm
2) StainIess steel (3cr13) or carbon steel
5) Normal jaw:30mm
6 ) Fine Adjustment
7) with internal & outer diameter measurement
8) with calibration on the vernier
9) with a locking screw on the vernier for easy reading during
10) step measurement
Instructions for use:
Before use, release sturdy screws, pull the balance of the foot box
with a silk cloth or tissue paper, measuring surface, the guide
Check the "zero" bit: nudge foot box, two measurements of the outer
claw face merger, The cursor "zero" engraved lines and tail
engraved lines at this time should be aligned with the groove of
the ruler "zero".
Measurement, should be balanced push, pull foot box, so that the
two measurement surface of the workpiece surface fitting, should
not have used the reading, the eyes should look squarely at the
surface of the engraved lines to avoid parallax.
measure the diameter size, the two outer side and the surface of
the workpiece to be measured should be fit.
Measuring the diameter size, within claws should be measured in the
direction of the diameter of the hole.
measure the depth dimension, so that the ruler end of measuring
surface with measurement objects workpiece fit, while measuring the
vertical face of the end of the deep foot rod workpiece.
Reading method: read first trip marked "zero" bit-foot body scale
the integer (mm); Read Traveling standard ruler scale engraved
lines aligned cell number, the small value multiplied by the number
of cursors worth, and then adding two numbers can.
Do not use calipers to measure movement or overheating object.
Do not put the caliper two claws as a wrench,, or dosage claw tip
to do the marking tool.
mobile foot the box should loosen sturdy screws.
Caliper use completed, must Kaijing the amount of surface and oil
antirust into the box.
the caliper storage should avoid magnets, heat and corrosive
Yuyao Yilong Tools Co.,Ltd. is specialized in measure tape, knife
and kinds of hand tools.
With more than 20 years experiences in the field of tools industry,
it’s our pleasure to provide you with high quality measuring tools.
As for measuring tool , below are the main features:
1) Made of stainless steel or carbon steel
2) Four way measurement(OD,ID,Step,Depth)
3) Main scale and vernier scale are chrome plated
4) Heat-treated main scale and hardened measuring plane
5) Special requirements can be customized
Our products are exported to America, Europe, Africa and Southeast
Asia. During the process of development
and innovation, we have continuously pursued high quality and high
standards, establishing favorable and
long-term cooperative relationships with many customers.
Welcome to your inquiry!