GFG Series High-Efficiency Fluidizing Dry
GFG series high efficiency boiling dryer is a new high efficiency
boiling dryer developed for GMP pharmaceutical engineering. The
equipment is composed of air filter, heater, main engine, skip, ash
removal chamber, connected air pipe, fan, silencer, etc..
When air is purified and heated, it is introduced from the bottom
of induced-draft fan and passed through the screen plate of raw
material. In workingchamber the state of fluidization is formed
through strring and negative effect.The moisture is evaporated and
removed rapidly and the material is dried quickly.
1. Mechanism screw extrusion granule, swing granule, wet mixed
2. Drying of wet granule and powder materials in medicine, food,
feed, chemical industry and other fields.
3. Large particle, small block, sticky block granular material.
4. Konjac, polyacrylamide and other dry materials of volume change.
1. The structure of fluidized bed is round so as to avoid dead
2. Inside the hopper there is a stirer in order to avoid
agglomeration of rawmaterial and forming canal of flow;
3. The granule is discharged through the method of turning over. In
this way it is .very convenient and full. The discharging system
can be designed as request too;
4. It is operated at the conditions of negative pressure and seal.
The air is filtered.Therefore it is simple in operation and
convenient in clean. It is an ideal equipmentthat is in conformity
with the requirements of GMP;
5. The drying speed is fast and the temperature is uniform. In
general the. dryingtime is 20- 30 minutes for each batch.
Main Technical Parameter:
|Consumption of steam||Kg/h||141||170||170||240||282||366||451|
|Time of operation||min||15-30|
|Height of mainmachine||Square||min||2750||2850||2850||2900||3100||3300||3650|
Schematic of installation: