High Density OM3 MPO Patch Cable , Data Centers Aqua Fiber Patch Cable

High Density OM3 MPO Patch Cable , Data Centers Aqua Fiber Patch Cable

MPO Patch Cable , a cost-effective alternative to time-consuming field termination, is designed for high-density fiber patching in data centers which need space saving and reduce cable management troubles. With Senko MPO connectors and Corning Clearcurve fiber, it is optimized for 40G QSFP+ SR4 to 10G SFP+ SR, 100G QSFP SR4 to 25G SFP-25G-SR-S optics direct connection and high-density data center applications.

Technical Parameter

MPO Patch Cable Keyed Characteristics

How to breakout 40G link into 4x 10G for going to different purpose? A type-B female MPO/MTP-4x LC harness cable is required. The following shows the 4x 10GBASE-SR SFP+ transceivers interconnection with 1x 40GBASE-SR4 QSFP+ transceivers by one MPO-4LC harness cable directly.

MPO Patch Cable Applications

• Telecommunication Networks.
• Data Communication Networks.
• Optical System Access Networks.
• Broadband / CATV Networks.
• Equipment / Switch Interconnections.

MPO Patch Cable Features

1. Single Mode Operation from 2.3 µm to 4.1 µm for Zirconium Fluoride (ZrF4) or 3.2 µm to 5.5 µm for Indium Fluoride (InF3).
2. Transmission from 285 nm to 4.5 µm for Zirconium Fluoride (ZrF4) or 310 nm to 5.5 µm for Indium Fluoride (InF3).
3. Compatible with Visible-Wavelength Alignment Beams.
4. Used in Spectroscopy, Environmental Sensing, and Medicine.
5. Low Fresnel Reflectance Losses: <4% per Face.

PUNO MTP Assemblies that specially dsigned for laser optimized 40G/100G structured cabling system that employs parallel optics transmission. For 40G Ethernet, 4Tx and 4 Rx fibers are transmitted at 10G for an aggregate of 40G by utilizing a 12-fiber MTP connector. Likewise, a 100G Ethernet is to use 10 Tx and 10 Rx fibers that are transmitted at 10G for an aggregated of 100G by using a 24-fiber MTP connector. Alternatively, 100G can use 2pcs of 12-fiber MTP connector. However, the single port 24-fiber connector is the preferred approach. PUNO OPTIC TECHNOLOGY CO., LIMITED is a manufacturer and trading company with 100 employees. Located in 5/F, 2nd Building, Baokun Industrial Park, Dalang of Longhua, Shenzhen, China 518109. We specialize in designing, researching, developing and manufacturing of Optical Fiber Connect Connector, Optical Fiber Coupler, Optical Fiber Attenuator, Optical Fiber Panel, Optical Fiber Splitter and Optical Terminal Box. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management We also offer OEM and ODM service for customers. We provide cost-effective and quality products. We are ready to serve you any time. For more information please view our website or contact us any time. Thanks for your attention and Welcome to visit us.