Dual axis laser diameter gauge for measuring pipe diameter up to
100mm. laser diameter measuring countrol device is the high-accuracy installment that uses the laser scan to carry
on the no-contacts on-line measurement. It (namely X axis and Y
axis) simultaneously measure the diameter in two directions.
It is applicable to measure and control the diameter of metal
wires, glass, pipes, wire and cable, etc. It is overcomes the
shortcomming of bi-directional measurement. The display unit can
simultaneously show the diameter mean value and roundness of wire
Photo 1 : Dual axis LDM100BXY measuring head
Photo 2 : DDC-7 Touch screen display controllerers
1. Technical paramet
|LDM-25XY||0.1 - 20mm||0.001||0.001mm|
|LDM-50XY||0.2 - 45mm||0.001||0.002mm|
|LDM-60XY||0.2 - 55mm||0.001||0.002mm|
|LDM-100BXY||0.2 - 95mm||0.001||0.002mm|
2. The performance indicators
Measurement: Laser scanning
Laser: Visible red semiconductor laser
Laser output power: <2mW
Operating voltage: ~ 220V plus/minus 15% 50 - 60Hz
Operating temperature: -10 ~ 40 Degrees Celsius
Humidity: <85% RH
Work mode: continuous
Power consumption: <30W
Dimensions: LDM25XY/LDM50XY Gauge head: 400mm * 400mm * 80mm
Support: 350mm * 200mm * (700-1000)mm
Height of central measuring position: 900-1200mm
1). Can be connected PLC, industrial computer.
2). RROFIBUS-DP can be allocated and MODBUS converter and PLC, IPC
3). Can be equipped remote controller DDC-3, DDC-5,DDC-7, on the
extruder and automatic feedback control to control the tolerance,
improve product quality, reducing consumption.
4. Display Controller (Model:DDC-3, DDC-5, DDC-7)
1). It be used to remote display and control.
2). Applicable to DC motors, VVVF motor.
3). The controller can control the speed of extruder or the tractor
according to the diameter tolerance.
4). Can simultaneously measure the outside diameter, roundness,
runout, including oval diameter. It can be used for shaft testing,
the detection of rubber roller, honeycomb ceramic detection.
Signal distance: more than 500m
Output voltage: plus/minus 10V
With RS485 It can connect to PLC industry controlling computer
The PROFIBUS-DP or MODBUS
Can be selected.
If you have any questions, please connect to us:
TEL: +86-135 9803 3248
Skype number: cnmeasure
Address: NO.36 Hongsong Road, High-tech Zone, Zhengzhou, CHINA,
Manufacturer: Zhengzhou Mercury-tech Co.,Ltd.