Detail: OEM 3G IO Interface Vehicle GPS Tracking Devices with
RS-232 Serial Port
Water-proof casing design is a patent can prevent GPS device was
damaged by into water, use aviation socket for IO interface, easy
to connect with cables; CAN/ 485 BUS interface, easy to control
vehicle; 1 route AD input interface can detect fuel consumption and
temperature; especially suitable for engineering truck, special
vehicle that run in severe environment.
Main features:
Based international newest chip, double core structure, build-in
RTKe OS, powerful.
GPRSand SMS double channels, TCP and UDP double working mode
Positioning based GPS reflected wave, assist with base station,
strong capacity to prevent blocking to reduce the blind area
Three proofing design, Quadruple protection for power source, 4
levels watchdog
Anti-dismantle design for SIMcard
Low power consumption
Build-in high capacity backup battery
CAN/ 485 BUS interface.
It can update remotely, easy to maintain
Approved by 3C, and approved by national grade quality
authentication.
Product functions:
1.Signal detecting and control: 6 routes signal sensor, 7 vehicle
status detecting, intelligence mode and forced mode to cut fuel/
circuit; user-defined backup output control.
2. Alarm: 8 alarms, 3 modes of alarm.
3. Monitoring: vehicleautomatic tracking/ monitoring, regions
setting, geo-fence, GPS mileage statistics, blind area
supplementary report, traces storage, base station positioning.
4. BUS communication: via CAN/ 485 BUS to achieve two ways
communication between PLC controller and service center, real time
monitor vehicle status and control vehicle.
5. Fuel consumption detecting: build-in AD input interface,
equipped floater attenuation cable can measure fuel consumption.
6. Remote update: main devices program was support to remote
download; user can renew the program remotely.
7.Protection:
Power saving mode: in this mode, GPS devices working current will
drop to30mA@ 12V when vehicle was in flameout.
Car battery over discharge protection: it will switch to supply
power by backup battery if car batterys voltage is very low ( 10V)
.
Over voltage protection: it will cut the external circuit to
protect GPS device if the voltage exceeds limit value ( 60V) ,
backup battery can work for 3h.
Performance parameters:
- - - -
- - - -
- - - -
Performance parameter: : |
- - - -
|
- - - -
Hardware features | | Remark |
Hardware framework | Adopt double core chip, RTKe embedded OS | |
Communication module | GPRS, SMS double channels module | |
Reliability design | Quadruple protection for power source, 4
levels watchdog | |
PCB protection | Three proofing protection | |
Water-proof design | Water-proof design for casing, water-proof
grade IP67 | |
Technical specifications | | |
Working voltage | 1060 V/ DC | |
Limiting voltage | 100V/ DC | |
Car battery protecting voltage | Low: 10V( 12V car battery) or 20V(
24V car battery) high: 60V | |
Power voltage of Anti-reversed connection | 100V | |
Average working current | 70mA DC 12V | |
Power saving mode | 30mA DC 12V | |
Backup battery | Working time 3h | |
Dimension | 85x 134x 35mm( L x W x H) | |
Canning material | Aluminum alloy | |
Main device weight | 0.35kgnet weight | |
Interface | | |
GPS antenna | BNC interface: 26dB cable length: 4m | |
GSM antenna | SMA interface: 3dB cable length: 3m | |
Vehicle detecting interface | 2 routes( 1 route high level, 1 route
low level) | |
AD detecting interface | 1 route AD signal input( for fuel
consumption detecting GPS device) | |
Communication interface | 1 route CAN BUS 1 route 485 port | |
Data interface | 1 route RS-232 serial port | |
Environment features | | |
Vehicle spark noise immunity | Discharge voltage 10 kV20 kV,
discharge frequency 20 times/ s200 times/ s | |
Electro-transient pulse noise immunity | 4KV, experiment grade IV |
|
Static discharge noise immunity | Contacting discharge 6KV, air
discharge 8KV, experiment grade III | |
Conduction interference limits | Accord with the requirements of
class B | |
Radiated interference limits | Accord with the requirements of
class B | |
Temperature characteristic | Working temperature -20 + 60 Limiting
temperature -30 -20, + 60+ 70 | |
Humidity | 595 non-condensation | |
GPS features | | |
Tracking sensitivity | 159dBm | |
Positioning time | Cold boot less than 34s; hot boot less than
3.5s; warm boot less than 33s, re-capture time 1.0s | |
Positioning accuracy | 10m2D RMS | |
Speed accuracy | 0.1m/ s | |
BS positioning accuracy | 100m | |
GSM/ GPRS features | | |
Frequency | EGSM900/ GSM1800 | |
Transmitting power | EGSM900: CLASS4( 2W) , GSM1800: CLASS1( 1W) |
|
GPRS | GPRS multi-slot class8class 10
GPRS mobile station class B
Downlink speed: max 85.6Kbps
Uplink speed: max 42.8Kbps | |
Data storage | | |
Trace record storage | 50, 000 trace record | |
Buffer memory for supplemental report ( blind area) | 500 ( points)
tracking info | |
Road detecting storage | Can set 8 roads data, each road can be
constituted by 1023 broken lines and 256 stations | |
Attribute areas storage | Can set 108 rectangle areas ( can set 20
polygon areas) | |
- - - -
Product configurations:
1. Standard configurations
1) main device 1 pcs
2) GSM antenna 1 pcs
3) GPS antenna 1 pcs
4) Warranty card
5) Certification
2.Optional configurations
1) . Accessories ( relay) for cut fuel/ circuit
2) . Accessories for fuel detecting ( floater attenuation cable)
Product picture:
Model Number: G-TK202
Brand Name: Dragon
Payment Terms: Pay in adva
Minimum:
Certification: CE, FCC, IP65
Delivery Time: 5 working days
Supply Ablity: