Air Relax Dryer
Continuous Dryer Machine For Blanket After Printing
Continuous Dryer Machine Application
The machine for blankets, Carpet,towels, coral velvet fabric, and
cotton, polyester, blended fabric printing or drying after washing
with a loose style,To avoid staining fabric, get a good shrinkage,
excellent dimensional stability and feel.
(1).Modular mix of products and processes according to different
requirements, any combination of machine processes.
(2).Nominal width :1600-4300mm according to user requirements.
(3).Oven Number: 4, 5, 6 ,8and so on,Modular combination.
(4).Operating temperature :100-135℃ (steam); 100-180℃ (thermal
oil), set the temperature controlled device.
(5).AC variable frequency synchronous drive, PLC programmable
control. Machine speed :10-50m / min under the process set.
(6).Single or multi-layer, using special wide Teflon mesh belt, can
be single or multiple fabrics to run, very efficient.
(7).Net with automatic tensioning, auto-correction, fault alarm,
correcting correction using aerodynamic, stable and reliable.
(8).Belt spray duct: a specially designed nozzle up and down two
bias to run a wavy fabric forward.
The Main Technical Description
a. Nominal Width:The width of the belt-mesh is 3200mm
b. Machinery Speed:5-50m/min, Can independently regulate
c. Machine Form:6-rooms,3-layers mesh-belt slack transmission,
d. Working temperature:100-180℃,Can independently regulate
e. Heat source: heat conducting oil
f. Driving mode:PLC ACfrequency conversion,speed-adjusting
g. Steel Frame:Native machine A steel frame is formed through
welding 100X10, 100X50.50X50 square pipes, is solid, and has
beautiful and elegant appearance. A drying room is wholly installed
on a bottom steel frame, and walking boards and inclined ladders
are arranged on two sides, and are convenient for operation.
h. Mesh belt:Teflon is sprayed and coated on the surface, and the
elongation amount is smaller and the tensile strength is big under
high temperature, the mesh specification is 5X5mm, the width is
i. Plaiter:Folded A3 C steel plate, pendulum cloth collection
j. Drying charmber:3-layers mesh-belt slack transmission,A building
block type efficient drying room is composed of a machine frame,
insulation boards, hot air circulation systems and exhaust systems.
The drying room comprises 6 rooms, (each room is 1.5m), a fabric
feeding area and a fabric discharging area of the drying room are
respectively provided with a section of cushioning chamber for
preventing hot air in the drying room from leaking outwards,
thickness of the insulation boards is 100mm.
k. Hot air circulation:Hot air circulation system is finished in a
sealed channel, air is heated through a radiator and reaches a fan
inlet through a channel surrounded by a steel plate, and is induced
to an upper air spraying buccal tube and a lower air spraying
buccal tube respectively through a circulating fan, and hot air
with high temperature is sprayed out from a spout. The hot air
circulation frequency is excessive, the temperature rising is
rapid, and wet air of the drying room can be easily removed,
thereby improving the efficiency of the drying room.
l. Circulation fans:Axial-flow, vanes are rear vertical types, and
adopt high temperature resistant 16Mn materials. The circulation
fans are dragged by a motor Y132GM-4P, 5.5Kw, and have the ch