high grade bauxite mines

Brand Name:RS

Model Number:sk

Place of Origin:China

..., the temperature of refractoriness under load is normally above 1420~1550°C , which is higher than the fireclay brick and it increases along with the AL2O3 content enhances. Characteristices of high alumina brick 1. High intensity for pressure 2.

Brand Name:Annec

Place of Origin:China

High Grade Bauxite Al2O3 48% High Alumina Refractory Bricks Definition: High Alumina Andalusite Fused Mullite Refractory Bricks is a kind of refractory material. The main component of this refractory brick is Al2O3. Due to different resources, national standards are not completely consistent. For example, European countries stipulate that the lower limit of Al2O3 content for high aluminum refractory is 42%. In China, the Al2O3 content in high

Brand Name:Junsheng

Model Number:High Alumina Bauxite

Place of Origin:China

...Grade Bauxite , Rotary Kiln Bauxite , Calcined Bauxite , Shaft Kiln Bauxite Details information Refractory grade bauxite Calcined bauxite is produced by sintering/calcining of low iron, low alkali containing raw bauxites at temperatures of 1600 - 1800 degree Celsius. In this calcination process the high refractory mineral phases corundum and mullite are formed. Refractory grade bauxite has high...

Brand Name:CHYL

Model Number:CHYL-YCL002

Place of Origin:Henan, China

High Grade Calcined Bauxite Ore Calcined Bauxite is produced by sintering high-alumina bauxite in rotary, round or shaft kilns at high temperatures of 1600℃-1800℃. This process of calcining (heating) bauxite in kilns removes moisture and gives Calcined Bauxite its high alumina content and refractoriness, low iron, and grain hardness and toughness. Physical and chemical index of High Grade Calcined Bauxite...

Brand Name:ZHENGHZHOUXINYU

Model Number:XY-GL45/60/70/75

Place of Origin:DONGBEILIAONINGHAICHENG

High alumina aggregate/bauxite/Shaft furnace burning/Ramon mill grinding/High density/Particles of custom Product description: High bauxite refers to bauxite with AL2O3 content greater than 48% after calcining, while Fe2O3 content is lower.The alumina homogenization material of our company is based on high-quality alumina raw material of yangquan, Shanxi Province, which is selected by grades, homogenized by stages and fired at high...

Brand Name:Daoer

Model Number:0-1mm, 1-3mm, 3-5mm, 5-8mm

Place of Origin:Shanxi, China

... low-iron and high-bauxite raw ore as raw materials and is calcined at a high temperature of 1600 degrees in a shaft kiln. The product has low iron content (within 1.5%) and high aluminum content (88%), low potassium (within 0.5%), low sodium (within

Brand Name:Yichang

Model Number:1-3mm...

Place of Origin:China

... Description: Brown Aluminum Oxide is made of high-quality bauxite as raw material, anthracite and iron filings. It is made by arc smelting at 2000°C or higher temperature. It is crushed and plasticized by self-grinding machine, ...

Brand Name:Sunrise

Place of Origin:China (mainland)

Model Number:TY-Z5.5-1

... furnace Mainly used in areas that require high abrasion and temperature resistance such as gliding rail bricks in steel pusher metallurgical furnaces, tapping platform (tapping spout) for tapping ...

Brand Name:SICHENG

Model Number:RKB

Place of Origin:HENAN,CHINA

...Bauxite Rotary Kiln Bauxite aggregate 80%/cement grade bauxite Product Description: Calcined Bauxite is produced by sintering high-alumina bauxite in rotary, round or shaft kilns at high temperatures of 1600℃-1800℃. This process of calcining (heating) bauxite in kilns removes moisture and gives Calcined Bauxite its high alumina content and refractoriness, low iron, and grain hardness and toughness. Its thermal stability, high

Brand Name:Sinocean

Model Number:SNH87

Place of Origin:Shanxi, China

Abrasive Grade Bauxite Abrasive grade bauxite, the feedstock for brown fused alumina, is prepared from low silic, low alkali material that is alcined at temperatures of approximately 1100 C. The minimum alumina content of 80% on a calcined basis is ...

Brand Name:hongtai

Place of Origin:xinmi

...subtropical areas .calcined bauxite is obtained by calcining (heating)superior grade bauxite at high temperature (from 85O°C to 1600°C) .this removes moisture thereby increasing the alumina content. compared to an alumina content of about 57%to 58%in

Brand Name:Hongtai

Model Number:SK36

High alumina brick with high bauxite as the main raw material, with soft raw clay as a binder, after molding and firing by about 1500 ℃ high temperature . According to the content of Al2O3,high alumina brick could be divided into three grades Features and advantages: 1. The dimensions are more exactly. 2. Low iron content and impurities 3. Good thermal stability; 4. High...

Place of Origin:china

Brand Name:ZG

Model Number:Calcined bauxite

Product Introduction Bauxite (Al2O3·nH2O), comes in three different forms: Gibbsite(Al(OH)3), Boehmite(AlO(OH), andDiaspore(AlO(OH). Most bauxite Deposits in China are in the third form. The color of bauxite usually is white or grey, however when the iron ...

Place of Origin:Henan, China

Model Number:high grade 20/40,30/50 and 40/70 mesh oil fracturi

1) 20/40,30/50,40/70 ceramic proppant 2) 7500psi and10,000psi proppant 3) lightweight, intermediate products 4) stim-lab Oil Fracturing Proppant Property Index of Jiaozuo FangHua Ceramics Co.,Ltd Performance Index 20/40 lightweight bauxite proppant 20/40 ...

Brand Name:RARE

Place of Origin:China

... in tropical and subtropical areas . Calcined bauxite ore is obtained by calcining (heating)superior grade bauxite at high temperature (from 85OC to 1600C) .this can removes moisture thereby increasing the alumina content. Compared to an alumina content of

Brand Name:sicheng abrasive

Model Number:46#

Place of Origin:china

...grade sandblasting brown fused alumina grit used in abrasives manufacturing Brown fused alumina is made of high-quality bauxite, anthracite and iron filings. It is cooled and smelted in a high temperature by more than 2000 degrees in an electric arc. It is crushed and shaped by a jaw crusher and a ball mill. After magnetic separation, the sieve is divided into various kinds. Its compact texture, high...

Brand Name:Jundao

Place of Origin:Zhengzhou,China

...grade high alumina brick Alumina content of 55% or more of a neutral refractory. Made of bauxite or other high alumina content of raw materials formed by molding and calcination. High thermal stability, refractoriness above 1770 ℃. Good slag resistance is mainly used for masonry blast furnace, hot stove, electric furnace top, blast furnace, reverberatory furnace, rotary kiln lining. High...

Place of Origin:China

Brand Name:Ally

...tropical and subtropical areas. Calcined Bauxite is obtained by calcining (heating) superior grade Bauxite at high temperature (from 850 °C to 1600 °C). This removes moisture thereby increasing the alumina content. Compared to an alumina content of about

Place of Origin:GUIZHOU,CHINA

Brand Name:HGWF

Model Number:AL 85PCT

High quality Calcined-Bauxite powder; Bauxite powder for the raw materials of welding flux Category of bauxite: Welding flux grade, Bauxite Al ≥ 80%; Place of origin: GUIZHOU PROVINCE, CHINA Brand Name: HGWM; Powder size: 80mesh ~ 125mesh; Main Chemical Composition: Al2O3: 85% Min. SiO2: 9%Max; TiO2: 6%Max. Specifications of bauxite powder: Al2O3: 86% Min; SiO2: 9%Max; TiO2: 6%Max; C: 0.05% Max; S: 0.02% Max; P : 0.04%max; Bauxite...

Country/Region:china

...tropical and subtropical areas .calcined bauxite is obtained by calcining (heating)superior grade bauxite at high temperature (from 85O℃ to 1600℃) .this removes moisture thereby increasing the alumina content. compared to an alumina content of about